AT&T EL52459 Handset operation, Speakerphone information, Last number redial, Speaker button

Telephone operation

Handset operation

Speakerphone information

During a call, press SPEAKER to switch between hands-free speakerphone

and normal handset use. Press	OFF/CLEAR to hang up.	Elapsed
		time
NOTES:
1. If you use the speakerphone during LOW BATTERY mode, the PHONE 0:00:30
handset is not lit except for the	SPEAKER button.

2.The speakerphone uses more power than the normal handset.

If the handset battery becomes very low while you are using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. When the battery is very low, you cannot switch a call from normal handset use to speakerphone mode.

3.After installing the battery into the handset, the screen may show LOW BATTERY. If you use speakerphone at this time, the battery may become depleted. Follow the instructions in the Battery installation & charging section on pages 5-6.

Last number redial

To view the recently dialed numbers:

•To display the most recently called number (up to 30 digits), press REDIAL/PAUSE.

•To view up to five recently called numbers, press REDIAL/PAUSE then press qCID or DIRp, or press REDIAL/PAUSE repeatedly.

REDIAL

888-883-2445

The handset beeps twice at the beginning and at the end of the list. Press OFF/CLEAR to exit.

To redial a number:

•To dial the displayed number, press PHONE/FLASH or SPEAKER.

-OR-

•You can call the most recently called number by pressing PHONE/FLASH or SPEAKER, then pressing REDIAL/PAUSE.

While reviewing the redial memory, press MUTE/DELETE to delete the displayed number.

20