Handset settings

Answering system settings

Message alert tone

When the message alert tone is set to ON, and there is at least one new message, the telephone base beeps every 10 seconds. Unless you change it, the message alert tone is set to off.

To change the setting:

1.When the handset is in idle mode, press MENU/SELECT to enter the main menu.

2.Press MENU/SELECT again.

3.Press qCID or DIRp to scroll to >ANS SYS SETUP, then press MENU/SELECT.

4.Press qCID or DIRp to scroll to >MSG ALERT TONE, then press MENU/SELECT.

5.Press qCID or DIRp to choose between ON and OFF.

6.Press MENU/SELECT to confirm your setting. A confirmation tone sounds.

NOTES:

1.The message alert tone beeps only if all the conditions below are met:

-Answering system is on.

-Message alert tone setting is on.

-There are new messages.

2.To temporarily turn off the message alert tone, see page 38.

>ANS. SYSTEM DIRECTORY

>ANS SYS SETUP PLAY MSGS

>MSG ALERT TONE ANSWER ON/OFF

MSG ALERT TONE ON

18

Page 23
Image 23
AT&T EL52309, EL52409, EL52459, EL52419, EL52259, EL52209 user manual Message alert tone