AT&T Generic 2, System 85, System 75, Generic 1 manual Phone Features, Answering and Placing a Call

Phone Features

The following features can be used no matter which communications system your 8101, 8102, or 8110 telephone is behind. Remember that you can use the Speakerphone and Mute features only if you are using an 8110 telephone. Some 8110 users will also be able to use the Auto Answer feature; check with your system manager.

Answering and Placing a Call ■

Note: If you are using the 8110 telephone, you can place and answer calls either by going off-hook(by lifting the handset) or leaving the handset on-hookand by pressing [ Spkr ] . Pressing [ Spkr ] simultaneously activates the built-in microphone so that you can place and answer calls without lifting the handset.

If you are using the 8102 telephone, you can connect an external speakerphone to the Speakerphone/headset jack on the bottom of your telephone. For procedures on answering and placing calls with the adjunct speakerphone, refer to the instructions that came with the equipment.

To answer a call	1	Pick up handset
	2	Speak to other party

To answer a call using 1

the speakerphone (for 8110 users)

2

When you hear the telephone ring, press [ Spkr ]

●Red light next to [ Spkr ] goes on

Speak to other party

To place a call	1	Pick up handset	[dial tone]
	2	Dial desired number
To place a call using the	1	While on-hook, press [ Spkr ]	[dial tone]
speakerphone (for 8110		● Red light next to [ Spkr ] goes on
users)
	2	Dial desired number

13