Receiver | AT&T Generic 2, System 85, System 75, Generic 1 manual

Starting with the handset on the TOP VIEW and continuing clockwise:

Handset

Data jack

Adjunct (equipment) jack (on the 8102 only)

Auxiliary power jack (on the 8110 only)

For placing and receiving calls (also known as the

receiver).

For connecting a device such as a modem to your telephone. This jack is labeled DATA.

For connecting adjunct equipment such as a speakerphone or headset to your telephone. This jack is labeled ADJUNCT.

For improving the performance of the built-in speakerphone on long loops where there is limited power available from the line. This jack is

labeled

Pause button (on the 8102 and 8110 only)

Programmable Dialing buttons (on the 8102 and 8110 only)

Hold light

Hold button

Redial button

Auto Answer button (on the 8110 only)

Mute button (on the 8110 only)

Message light

For inserting a .5-second pause/delay into a telephone number stored on a programmable dialing button or into

adialing access code in the Auto-Pause feature of Redial. See “Redial (With Auto-Pause)”in the section titled How to Use the Features.

The 12 buttons on which you can program frequently dialed telephone numbers, emergency numbers, or feature codes.

A red light that remains on to remind you that you have a call on hold.

For putting a call on hold.

For redialing the last number you dialed from the dial pad.

For automatically activating the built-in speakerphone whenever a call comes in. Your system manager can tell you whether you have this feature.

For turning off the microphone associated with the handset or the built-in speakerphone.

A red light that flashes when a message has been left for you.