Hold (with Second Dial Tone) | ■ |
Note: The following feature allows you to place or answer another call or activate another feature while you have a call on hold. If you want merely to put a call on hold while you are busy with another task (and do not need to answer or place another call), press [ Hold ] on your telephone. When you want to return to the held call, press [ Hold ] again. See “Hold” in the section titled Phone Features.
Version Note: If you are using System 75, Version 1, use these directions:
To put a call on hold | 1 | Press [ Flash ] | [recall dial tone] |
|
| Note: Do not hang up or call will be dropped. | |
|
|
|
|
To return to held call | 1 | Press [ Flash ] | twice |
To put call 1 on hold | 1 | Press [ Flash ] | [recall dial tone] |
| |
and place call 2 |
| ● Call 1 is put on hold |
|
| |
|
|
|
|
| |
|
| 2 | Dial call 2 (or another feature) |
|
|
|
|
|
|
|
|
To put call 2 on hold | 1 | Press [ Flash ] | [recall dial tone] |
| |
and return to call 1 |
| ● Call 2 is put on hold |
|
| |
|
|
|
|
| |
|
| 2 | Press [ Flash ] twice |
|
|
|
|
| ● Call 1 is reconnected |
|
|
|
|
|
|
| |
| To complete call 2 | 1 | After party on call 2 hangs up, press [ Flash ] twice |
| |
| and return to call 1 |
| ● Call 1 is reconnected |
|
|
|
|
|
|
| |
29
