Tones and Their Meanings
Ringing tones are produced by an incoming call. Handset tones are those which you hear through the handset (receiver).
Ringing Tones
●1 ring — A call from another extension.
●2 rings — A call from outside or from the attendant.
●3 rings — A priority call from another extension, or from an Automatic Callback call you placed.
●
Handset Tones
●
●
●
●
auto answer tone — A short burst of tone immediately following a ring when the Auto Answer feature is active.
busy tone — A
call waiting tone — One, two, or three beeps of
the source: one for an internal call, two for an outside or attendant call, three for a priority call.
call waiting ringback tone — A ringback tone with a
●
●
●
●
confirmation tone — Three short bursts of tone; indicates a feature activation or cancellation has been accepted.
coverage tone — One short burst of tone; indicates your call will be sent to another extension to be answered by a covering user.
dial tone — A continuous tone; indicates dialing can begin.
●
●
●
programming tone — A low continuous tone when you are in programming mode (programming a programmable dialing button).
recall dial tone — Three short bursts of tone followed by a steady dial tone; indicates the feature request has been accepted and dialing can begin.
reorder tone — A fast busy tone repeated 120 times a minute; indicates all trunks are busy.
●ringback tone — A
34
