2

3

4

Note: Each telephone number or feature code is stored as a separate list item.

Pick up handset

[dial tone]

Dial Abbreviated Dialing Program code

[dial tone]

Dial personal list number (1, 2, or 3)

Version Note: If you are using System 75,

Version 1, you may omit Step 4.

5 Dial list item (1, 2, 3...)

[dial tone]

6Dial number you want to program

Version Note: If you are using System 75, Version 1, you can use up to 16 digits; for Version 2, you can use up to 24 digits.

Note: If you are programming an outside number, be sure to include a trunk code, if applicable.

7 Press [ # ]

[confirmation tone]

Number is stored

Repeat Steps 5 through 7 if you want to program additional items on the same list; hang up and begin again at Step 1 if you want to program items on another personal list

8Hang up to end programming

Note: Keep your own personal lists in the Abbreviated Dialing table provided in the back of this booklet; group, system, and enhanced lists are available from your system manager.

To place a call using a

1 Dial appropriate Abbreviated Dialing List code:

personal, group, system,

List 1

 

 

 

or enhanced list

 

 

[dial tone]

 

List 2

 

 

 

List 3

2Dial desired list item (1, 2, 3...)

Stored number is automatically dialed

24

Page 29
Image 29
AT&T System 75, System 85, Generic 2, Generic 1 manual