OSD Operation
(F4 ADM: continued)
Setting | Function |
RESET | If you change the position of one of the Stations in the daisy |
STATION IDS | chain, the OSD settings will no longer correspond to the new |
| situation. This function directs the OSD to rescan the Station |
| positions of the entire installation and updates the OSD so |
| that the OSD Station information corresponds to the new |
| physical layout. |
| Note: Only the Station Numbers get updated. Except for the |
| Port Names, all Administrator settings (such as Set Accessible |
| Ports, Set Quick View Ports, etc.), for all of the computers |
| affected by the change, have to be manually redone. |
|
|
FIRMWARE | In order to upgrade the |
UPGRADE | firmware (see Chapter 5), you must first invoke Firmware |
| Upgrade Mode with this setting. |
|
|
