The Firmware Upgrade Utility

5.After you have made your selection(s), Click Next to perform the upgrade.

If you enabled Check Firmware Version, the Utility compares the device’s firmware level with that of the upgrade files. If it finds that the device’s version is higher than the upgrade version, it brings up a dialog box informing you of the situation and gives you the option to Continue or Cancel.

If you didn’t enable Check Firmware Version, the Utility installs the upgrade files without checking whether they are a higher level, or not.

As the Upgrade proceeds status messages appear in the Status Messages panel, and the progress toward completion is shown on the Progress bar.

5-5

2003-01-27

Page 53
Image 53
ATEN Technology ACS-1208AL, ACS-1216AL user manual Firmware Upgrade Utility