ATEN Technology ACS-1208AL, ACS-1216AL user manual Control, Hotkey, Summary

ACS-1208AL / ACS-1216AL User Manual

Hotkey The Beeper can be Hotkey toggled On and Off (see Activate Beeper, p. Beeper 4-9). To toggle the Beeper, key in the following Hotkey combination:

Control

1.Invoke Hotkey Mode (see p. 3-1).

2.Press [B]

After you press B, the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit Hotkey Mode.

Hotkey
Summary
Table
	[Num Lock] + [-]	[Port ID] [Enter]	Switches access to the computer that
			corresponds to that Port ID.
		[T] [n] [Enter]	Sets the Auto Scan interval to n
			seconds - where n is a number from 1
			- 255.
		[A]	Invokes Auto Scan Mode.
			When Auto Scan Mode is in effect, [P]
			or Left Click pauses Auto Scanning.
			When Auto Scanning is paused,
			pressing Any Key or another Left Click
			resumes Auto Scanning.
		[←]	Invokes Skip Mode and Skips from
			the current port to the first accessible
			port previous to it.
		[→]	Invokes Skip Mode and Skips from
			the current port to the next accessible
			port.
		[↑]	Invokes Skip Mode and Skips from
			the current port to the last accessible
			port of the previous Station.
		[↓]	Invokes Skip Mode and Skips from
			the current port to the first accessible
			port of the next Station.
		[B]	Toggles the Beeper On or Off.

3-6

2003-01-27