KH1508i / KH1516i User Manual
(Continued from previous page.)
Setting | Function |
|
|
SET | Specifies the operating platform of the computer attached to each port. |
OPERATING | For each port, press the [Spacebar] to cycle through the choices (PC, |
SYSTEM | Mac, Sun, and Other). Repeat until all the ports have been set, then |
| press [Esc]. The default is PC. |
| Note: If you are installing a Sun or Mac computer, before you run it for |
| the first time you must set the correct operating system for the port it is |
| connected to with this function; otherwise, it will not boot. |
|
|
SET CAT 5 | Lets you specify how long the Cat 5 cable between the port and the |
LENGTH | KVM adapter cable is. Press [Spacebar] to cycle through the cable |
| length settings: |
| S: Short – for up to 25 m |
| M: Medium – for between 20 and 40 m |
| L: Long – for above 35 m |
| An S, M, or L appears next to the port to indicate the choice. |
|
|
SET | Sets the keyboard language layout for the computers attached to each |
KEYBOARD | port. Press [Spacebar] to cycle through the choices: English (US); |
LANGUAGE | English (UK); French; German; Japanese; Korean; Traditional |
| Chinese; and Spanish. The default is English (US). |
|
|
FIRMWARE | In order to upgrade the KH1508i / KH1516i’s firmware (see KH1508i / |
UPGRADE | KH1516i Mainboard Upgrade, page 40) you must first enable |
| Firmware Upgrade Mode with this setting. |
| When you bring up this menu, the current firmware version levels |
| display. Select Y to enable Firmware Upgrade Mode, or N to leave this |
| menu without enabling it. |
|
|
ADAPTER | In order to upgrade an Adapter Cables’ firmware (see Adapter Cable |
UPGRADE | Upgrade, page 46), you must first enable its Upgrade Mode with this |
| setting. Press [Spacebar] to select the KVM Adapter Cable you want |
| to upgrade. |
| When you select a KVM Adapter Cable, its current firmware version |
| levels display. Select Y to enable Firmware Upgrade Mode, or N to |
| leave this menu without enabling it. |
|
|
30