KH1508i / KH1516i User Manual

(Continued from previous page.)

Setting

Function

 

 

OSD Hotkey

Selects which Hotkey controls the OSD function: [Scroll Lock] [Scroll

 

Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may conflict with

 

programs running on the computers, the default is the Scroll Lock

 

combination.

 

 

ID Display

Selects how the Port ID is displayed: the Port Number alone (PORT

 

NUMBER); the Port Name alone (PORT NAME); or the Port Number

 

plus the Port Name (PORT NUMBER + PORT NAME). The default is

 

PORT NUMBER + PORT NAME.

 

 

ID Duration

Determines how long a Port ID displays on the monitor after a port

 

change has taken place. You can choose an amount from 0 - 255

 

seconds. The default is 5 Seconds.

 

Check the Always On box to constantly show the ID display.

 

 

Scan Select

Selects which computers will be accessed under Auto Scan Mode (see

 

Auto Scanning, page 112). Choices are: ALL - All the Ports which

 

have been set Accessible (see Port Access, page 67); POWERED ON

 

- Only those Ports which have been set Accessible and are Powered

 

On; QUICK VIEW - Only those Ports which have been set Accessible

 

and have been selected as Quick View Ports (see SET QUICK VIEW

 

PORTS, page 28,); QUICK VIEW + POWERED ON - Only those Ports

 

which have been set Accessible and have been selected as Quick

 

View Ports and are Powered On. The default is ALL.

 

 

Scan Duration

Determines how long the focus dwells on each port as it cycles

 

through the selected ports in Auto Scan Mode (see Auto Scanning,

 

page 112). Key in a value from 0 - 255 seconds. The default is 10

 

seconds; a setting of 0 disables the Scan function.

 

 

Screen

If there is no input from the console for the amount of time set with this

Blanker

function, the screen is blanked. Key in a value from 0–30 minutes. A

 

setting of 0 disables this function. The default is 0 (disabled).

 

 

Logout

If there is no Operator input for the amount of time set with this

Timeout

function, the Operator is automatically logged out. A login is necessary

 

before the KH1508i / KH1516i can be accessed again. Enter a value

 

from 0–180 minutes. The default is 30 minutes. 0 disables the function.

 

 

Beeper

When set to ON, the beeper sounds whenever the port is switched,

 

when activating the Auto Scan function (see Auto Scanning,

 

page 112), or when an invalid entry is made on an OSD menu. The

 

default is ON.

 

 

Change

Allows a user to change the account password. After clicking the

Password

Change Password button, a dialog box appears. Enter the old

 

password. Then, enter a new password and confirm it by entering it

 

again. Press OK to save changes, or press Cancel to discard changes.

 

 

84