Chapter 6. Administration and Configuration

Radius

If you are using a RADIUS server, set up its parameters as follows:

1.Check Enable Radius.

2.Fill in the IP addresses and Service Ports for the Primary and Alternate RADIUS servers.

3.Set the time in seconds that the KH1508i / KH1516i waits for a RADIUS server reply before it times out in the Timeout field.

4.Set the number of RADIUS retries allowed in the Retries field.

5.Key the Shared Secret character string that you want to use for authentication between the KH1508i / KH1516i and the RADIUS Server in this field.

6.Set the access rights for each user on the RADIUS server according to the information in the table on the next page.

73