Chapter 1. Introduction
No. | Component | Description |
|
|
|
1 | Power Socket | The power cord to the AC source plugs in here. |
|
|
|
2 | Power Switch | This is a standard rocker switch that powers the KH2508A / |
|
| KH2516A on and off. |
|
|
|
3 | Daisy Chain | When daisy chaining units (see Daisy Chaining, page 17), |
| Ports | the daisy chain cables plug in here. The port on the left is the |
|
| Chain In port; the port on the right is the Chain Out port. |
|
|
|
4 | Grounding | The wire used to ground the unit connects here. |
| Terminal |
|
|
|
|
5 | Console 1 | The KH2508A / KH2516A supports two independent |
| Ports | consoles. If this is a single station installation, or if this is the |
|
| first station of a daisy chained installation, the keyboard, |
|
| monitor, and mouse that make up Local Console 1 plug into |
6 | Console 2 | section no. 5 and Local Console 2 plugs into section no. 6. |
| Ports | You can use any combination of PS/2 and USB keyboards |
|
| and mice for the console. |
|
|
|
7 | KVM Port | The Cat 5e/6 cables that link to the KVM adapter cables |
| Section | (which link to the computers) plug in here. |
|
|
|
9