Chapter 2. Hardware Setup

Rack Mounting

The KH2508A / KH2516A can be mounted in a 19" (1U) rack. The mounting brackets can screw into either the front or the back of the unit so that it can attach to the front or the back of the rack. To rack mount the unit:

1. Remove the screws at the front or the rear, as shown in the diagram below.

Philips hex head

M3x6

Philips hex head

M3x6

2.Screw the mounting brackets into the sides of the unit at the front or the rear, as shown in the diagram below.

Philips hex head

M3x8

Philips hex head

M3x8

3. Slide the unit into the front or rear of the rack and secure it to the rack.

13