KH2508A / KH2516A User Manual

Upgrade Failed

If the upgrade failed to complete successfully a dialog box appears asking if you want to retry. Click Yes to retry. If you click No, the Upgrade Failed screen appears similar to below:

Click Cancel to close the Firmware Upgrade Utility. See the next section, Firmware Upgrade Recovery, for how to proceed.

Firmware Upgrade Recovery

Should the firmware on the switch be missing or corrupted it may not be possible to operate or boot the switch. This could be due to:

ŠStarting the Firmware Upgrade mode (see FIRMWARE UPGRADE, page 33), and then canceling the upgrade.

ŠAn interruption of the firmware upgrade.

ŠThe firmware upgrade procedure failing.

ŠThe unit’s firmware becoming corrupted for unknown reasons.

Main Board and OSD Firmware Upgrade Recovery

To perform a firmware upgrade recovery, do the following:

1.On the KVM Switch slide the Firmware Upgrade Recovery Switch (see page 7) to the Recover position.

2.Power off and restart the switch according to the instructions given in the Powering Off and Restarting section (see page 21).

56