ATEN Technology KH2508A, KH2516A Administrator Login Failure

Appendix

Administrator Login Failure

If you are unable to perform an Administrator login (because the Username and Password information has become corrupted or you have forgotten it, for example) you can clear the login information with the following procedure:

1.Power off the KH2508A / KH2516A and remove its housing.

2.Short the jumper labeled J8.

3.Power on the switch.

The on screen display will show a message informing you that the password information has been cleared.

4.Power off the switch.

5.Remove the jumper cap from J8.

6.Close the housing and start the KH2508A / KH2516A back up.

After you start back up, you can use the default Username and Password (see OSD Overview, page 23) to log in.

67