KH2508A / KH2516A User Manual
F7: SCANThis function automatically switches among the available computers at regular intervals so that you can monitor their activity without having to take the trouble of switching manually.
The selection of computers to be included for Auto Scanning is made with the Scan/Skip mode setting under the F3 SET function (see page 29).
The amount of time that each port displays for is set with the Scan Duration setting under the F3 SET function (see page 28).
As each computer is accessed, an S appears in front of the port ID
display to indicate that it is being accessed under Auto Scan mode.
While you are in Auto Scan mode, you can pause the scanning in order to keep the focus on a particular computer either by pressing P, or with a left click of the mouse. To resume scanning, press any key or left click again. See Invoking Auto Scan, page 42, for details.
While Auto Scan mode is in effect, the console will not function normally. You must exit Auto Scan mode in order to regain control of the console.
To exit Auto Scan mode, press the [Spacebar] or [Esc].
36