KH2508A / KH2516A User Manual

F3: SET

Accessing this function allows the administrator and each user to set up an individual working environment. A separate profile for each operator is stored by the OSD and is activated according to the username provided during login.

To change a setting:

1.Double-click it; or move the highlight bar to it, then press [Enter].

2.After you select an item, a submenu with further choices appears. To make a selection, either double click it; or move the highlight bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:

Setting

Function

 

 

OSD

Selects which hotkey activates the OSD function:

HOTKEY

[Scroll Lock] [Scroll Lock]; [Ctrl] [Ctrl] or [Alt] [Alt].

 

 

Since the [Ctrl] or [Alt] key combinations may conflict with programs

 

running on the computers, the default is the [Scroll Lock] combination.

 

 

PORT ID

Allows you to position where the port ID appears on the monitor. The

DISPLAY

default is the upper left corner, but you can choose to have it appear

POSITION

anywhere on the screen.

 

Use the mouse or the arrow Keys plus Pg Up, Pg Dn, Home, End, and

 

5 (on the numeric keypad with Num Lock off), to position the port ID

 

display, then click or press [Enter] to lock the position and return to the

 

Set submenu.

 

Note: The setting affects the currently selected port. If you don’t want

 

to use the default position, you must change the setting for each port

 

individually.

 

 

PORT ID

Determines how long a port ID displays on the monitor after a port

DISPLAY

change has taken place. There are two choices: 3 seconds and

DURATION

Always On.

 

 

PORT ID

Selects how the port ID is displayed: the port number alone (PORT

DISPLAY

NUMBER); the port name alone (PORT NAME); or the port number

MODE

plus the port name (PORT NUMBER + PORT NAME). The default is

 

PORT NUMBER + PORT NAME.

 

 

SCAN

Determines how long the focus dwells on each port as it cycles through

DURATION

the selected ports in Auto Scan mode (see F7: SCAN, page 36). Key in

 

a value from 1–255 seconds, then press [Enter]. Default is 5 seconds.

 

 

28