KH2508A / KH2516A User Manual

Auto Scan Mode Switching

Auto Scan automatically switches among all the active computer ports that are accessible to the currently logged on user at regular intervals. This allows their activity to be monitored automatically (See SKAN/SKIP MODE of the OSD F3 SET function, page 29).

Setting the Scan Interval

The amount of time Auto Scan keeps the focus on each port is set with the SCAN DURATION setting of the OSD F3 SET function (see page 28). You can change the scan interval, before you activate Hotkey Auto Scanning, by entering the following Hotkey combination:

1.Invoke Hotkey mode:

[Num Lock] + [-] or [Ctrl] + [F12]

2.Key in [A][n]

Where [A] is the letter A, and [n] is a number from 1–255 that represents the length of the focus time in seconds.

The letter A and the numbers display on the command line as you key them in. Use [Backspace] to erase any wrong entry.

3.Press [Enter]

After you press [Enter], you exit Hotkey mode, and are ready to start Auto Scanning.

Invoking Auto Scan

To invoke Auto Scanning mode, key in the following Hotkey combination:

1.Invoke Hotkey mode:

[Num Lock] + [-] or [Ctrl] + [F12]

2.Press [A] + [Enter].

ŠWhile you are in Auto Scan mode, you can pause the scanning to keep the focus on a particular computer by pressing [P]. When Auto Scanning is paused, the Command Line displays: Auto Scan: Paused.

(Continues on next page.)

42