Chapter 1. Introduction
1.Power Socket
The power cord to the AC source plugs in here.
2.Power Switch
This is a standard rocker switch that powers the station on and off.
3.User Ports
The Cat 5 cables from the console modules plug in here.
4.Firmware Upgrade Port
The Cat 5 cable that transfers the firmware upgrade data from the administrator's computer to the KM0216 / KM0432 plugs into this
5.Daisy Chain Ports
When daisy chaining stations (see page 19), the daisy chain cables plug in here.
The upper port is the Chain In port; the lower one is the Chain Out port. The Chain In port is not used on the Master (First Stage) unit.
6.KVM Ports (CPU Ports)
The Cat 5 cables that link the KVM adapter cables to the KM0216 / KM0432 plug in here.
9