KM0216 / KM0432 User Manual

F4 ADM

F4 is a Super Administrator and Administrator only function. It allows them to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices appears. Double Click the choice you want, or move the Highlight Bar to it then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:

Note: All your setting changes are stored in temporary memory and remain in effect for the duration of your session. The changes only become permanent when you Log out of the OSD (see F8 LOUT, page 47). If you shut down the KM0216 / KM0432 without first logging out, your changes are discarded.

Setting

Function

 

 

SET

This function is used to set Usernames and Passwords:

USERNAME

1. One Super Administrator, one Administrator, and four User pass-

AND

words can be set.

PASSWORD

2. After you key in a name for the Super Administrator, Administrator,

 

 

or User, a screen that allows you to key in the username and pass-

 

word appears. The username and password may be up to 15 char-

 

acters long, and can consist of any combination of letters and

 

numbers (A–Z, 0–9).

 

3. For each individual, key in the Username and Password, then press

 

[Enter].

 

4. To modify or delete a previous Username and/or Password, use the

 

backspace key to erase individual letters or numbers.

 

 

SET

If there is no input from the console for the amount of time set with this

LOGOUT

function, the Operator is automatically logged out. A login is necessary

TIMEOUT

before the console can be used again.

 

This enables other Operators to gain access to the computers when

 

the original Operator is no longer accessing them, but has forgotten to

 

log out. To set the timeout value, key in a number from 1–180 minutes,

 

then press [Enter]. If the number is 0 (zero), this function is disabled.

 

The default is 0 (disabled).

 

 

 

(continues on next page)

40