Chapter 6. The Firmware Upgrade Utility
If you didn't enable Check Firmware Upgrade, the Utility installs the upgrade files without checking their version level.
While a device group is being upgraded, the background behind its name changes to green and blinks on and off to indicate that upgrading for that device group is in progress.
As the Upgrade proceeds, status messages appear in the Status Messages panel, and the progress toward completion is shown on the Progress bar.
As each device update completes, its status is reported in the Status Messages panel.
When a device group upgrade is successful, the background behind the device group name changes to pink to indicate so; if a member of a device group fails to upgrade successfully, the background behind the device group name changes to red to indicate that there was an upgrade failure in the group. Check the Status Messages to ascertain which device failed to upgrade.
(continues on next page)
61