KM0216 / KM0432 User Manual

Hotkey Beeper Control

The Beeper (see ACTIVATE BEEPER, page 41) can be Hotkey toggled On and Off. To toggle the Beeper, key in the following Hotkey combination:

1.Invoke HKM (see page 49).

2.Press [B]

After you press B, the Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit HKM.

Hotkey Summary Table

[Num Lock] + [*]

or

[Num Lock] + [-]

[Port ID] [Enter]

Switches the KVM focus to the computer

 

that corresponds to that Port ID.

 

 

[T] [n] [Enter]

Sets the Auto Scan interval to n

 

seconds—where n is a number from 1–

 

255.

 

 

[A]

Invokes Auto Scan Mode.

 

When Auto Scan Mode is in effect, press

 

[P] or left-click the mouse to pause Auto

 

Scanning.

 

When Auto Scanning is paused, press any

 

key or left-click the mouse to resume Auto

 

Scanning.

 

 

[←]

Invokes Skip Mode and skips from the

 

current port to the first previous accessible

 

port.

 

 

[→]

Invokes Skip Mode and skips from the

 

current port to the next accessible port.

 

 

[↑]

Invokes Skip Mode and skips from the

 

current port to the last accessible port of

 

the previous station.

 

 

[↓]

Invokes Skip Mode and skips from the

 

current port to the first accessible port of

 

the next station.

[B]Toggles the beeper on or off.

54