ATEN Technology KM0216 / KM0432 58

KM0216 / KM0432 User Manual

F5 SKP

This function enables you to easily skip backward or forward—switching the console focus from the currently active KVM port to the previous or next available one.

The selection of computers to be available for Skip Mode switching is made with the Scan/Skip Mode setting under the F3 SET function (see page 39).

When you are in Skip Mode, press [←] to switch to the previous computer in the list; press [→] to switch to the next computer in the list; press [↑] to switch to the last computer on the previous station in the list; press [↓] to switch to the first computer on the next station in the list.

Note: When you Skip, you only Skip to the previous or next available computer that is in the Scan/Skip Mode selection (see SCAN/SKIP MODE , page 39).

When the focus switches to a Port has been selected for Scan/Skip Mode, a Left/Right Triangle symbol appears before its Port ID Display to indicate so.

While Skip Mode is in effect, the console will not function normally. You must exit Skip Mode in order to regain control of the console.

To exit Skip Mode, press [Spacebar] or [Esc].