KM0216 / KM0432 User Manual

(continued from previous page)

Setting

Function

 

 

SET QUICK

This function lets the Administrator select which Ports to include as

VIEW PORTS

Quick View ports.

 

Š To select/deselect a port as a Quick View Port, click the port, or use

 

the Navigation Keys to move the highlight bar to it, then press

 

[Spacebar].

 

Š When a port has been selected as a Quick View Port, an arrowhead

 

displays in the QV column of the LIST on the Main Screen to

 

indicate so. When a port is deselected, the arrowhead disappears.

 

Š If one of the Quick View options is chosen for the LIST view (see F2

 

LIST, page 37), only a Port that has been selected here will display

 

on the List.

 

Š If one of the Quick View options is chosen for Auto Scanning (see

 

SCAN/SKIP MODE, page 39), only a Port that has been selected

 

here will be Auto Scanned.

 

The default is for no ports to be selected.

 

 

SET

This function allows the Administrator to define Operator access to the

ACCESSIBLE

computers on the installation on a Port-by-Port basis.

PORTS

For each Operator, select the target Port; then press the [Spacebar] to

 

 

cycle through the choices: F (Full access), V (View Only), or blank (No

 

access). Repeat until all access rights have been set, then press

 

[Enter]. The default is F for all users on all Ports.

 

Note: A blank setting means that no access rights are granted. The

 

Port will not show up on the User's List on the Main Screen.

 

 

SET ACCESS

If there is no input from the console accessing a particular port for the

TIMEOUT

amount of time set with this function, the port is released, allowing it to

 

be accessed by the other consoles.

 

To set the timeout value, key in a number from 0–255 seconds, then

 

press [Enter].

 

If the number is 0 (zero), this function is disabled. The default is 5

 

seconds.

 

 

 

(continues on next page)

42