PN9108 User Manual
(Continued from previous page.)
Heading | Meaning |
|
|
Kill the Power | If this option is selected, the PN9108 waits for the |
| amount time set in the Power Off Delay field (see below), |
| and then turns the Outlet's power OFF when its Power |
| Button is clicked to turn off the power. Turning the power |
| off performs a cold |
| function disables the Reboot checkbox on the main |
| screen. |
|
|
Confirmation Required | If this option is enabled (there is a check in the |
| checkbox), a dialog box comes up asking you to confirm |
| the operation before it is performed. If it is disabled (there |
| is no check in the checkbox), the operation is performed |
| without confirmation. |
|
|
Power On Delay | Sets the amount of time the PN9108 waits after the |
| Power Button is clicked before it turns on the computer |
| attached to the corresponding outlet. |
|
|
Power Off Delay | Sets the amount of time the PN9108 waits after the |
| Power Button is clicked before it shuts down the |
| computer attached to the corresponding outlet. |
| For the System after AC Back option, after the delay time |
| expires, the PN9108 waits another fifteen seconds, then |
| shuts the computer down. |
| The default delay time is 15 seconds. The maximum |
| delay time is 999 seconds. |
|
|
To save your settings, click Save. To exit without saving your changes, use your browser's Back function to go back to the Main web page, or click another button on the page to go to a different function.
*Modem Ring Resume and System after AC Back only work with computers capable of a Safe Power Shutdown. See step 2 of Single Stage Installation, page 10.
28