PN9108 User Manual
Indirect Dial In Connection (PPP)
This method uses a modem connection to phone into the PN9108 from a remote location.
Connection Setup
1.Set up your hardware configuration to match the diagram, below:
PN9108
Serial Cable | Serial Cable |
|
Phone Line
Remote
Operator
Modem | Modem |
Note: 1. Use standard 9 pin serial modem cables to connect to the modems.
2.Connect the serial port of the modem that the PN9108 uses to its
3.The modem must be set to Auto Answer incoming calls.
2.Set up your connection configuration as specified in Steps 2 - 9 of the Direct Dial In Connection, section (see page 55).
3.For Step 8, key in the telephone number of the modem that the PN9108 uses.
4.Click Finish.
A new icon that you can use to connect to the PN9108 is created in the
60