Chapter 6. Out of Band Operation

Finishing Up

This step is the same as for a direct dial in connection. See page 58 for details.

Logging In

1.In the Out of Band Configuration dialog box (see page 45), make sure that the Enable dial-out function setting is disabled (the box is unchecked), and that the PN9108's baud rate is set to 115200.

2.Double click the icon you created in the Dial-up Network folder.

3.Key in your Username and Password; click Connect and wait for the Authentication procedure to complete (be patient, it may take a few moments).

4.Use your browser or Telnet to access the PN9108 the same way as if you were accessing it over the net.

61