PN9108 User Manual

Direct Terminal Connection (HyperTerminal)

HyperTerminal Setup

1.Use a 9 pin null modem cable (pin 2 to pin3; pin 3 to pin2) to connect a COM port on a PC to the PN9108's RS-232 port.

Note: The null modem cable must be wired for either full or loop back handshaking. See the diagrams on page 83for details.

2.On your PC, run the HyperTerminal program:

Start → Programs → Accessories → Communications → Hyper Terminal → Hypertrm.exe

The following dialog box appears:

Key a name to describe the connection in the Name field (we used Com1Test); select an icon to represent the connection; then click OK.

Note: In the examples that follow we use COM1. If you use a different COM port, change the settings accordingly.

48