Chapter 3. Local Operation

Enter Password

If the VM1616T has been configured to require a password for local operation (see Security Mode, page 28], when the password screen is accessed, the cursor flashes on the first digit. Enter a 4-digit password to continue to the Main Screen.

Note: If you are accessing the VM1616T for the first time, the default password is 1234.

Enter Password: 0 0 0 0

Incorrect Password

To enter a password, do the following:

1.Use the front panel Out dial and turn it clockwise (right) or counterclockwise (left) to move the cursor.

2.Use the front panel In dial to cycle through the numbers. Turn it clockwise (ascending from 0, 1, 2 .... 9) or counterclockwise (descending from 0, 9, 8

....1).

3.Press and Release Out/In/Enter pushbuttons to confirm the password and continue to the Main Screen.

Note: 1. If you enter an incorrect password, re-enter the correct password over the incorrect string.

2.If Password Required (see Security Mode, page 28) is enabled, the timeout is 5 minutes.

17