Chapter 4. Remote Operation

Setup

Click the Setup icon to configure the VM1616T’s IP and serial settings, and to name all the ports in your installation.

IP Setup

The Web Setup settings enable you to configure the VM1616T’s Web interface connection. Changes take a few seconds and automatically redirect you to the IP address specified.

Enter values and then click Save or Clear. Click Default Setting to use the following defaults:

ŠIP Address – 192.168.0.60

ŠSubnet Mask – 255.255.255.0

ŠDefault Gateway – 192.168.0.1

ŠWebsite Timeout – 5 minutes

Note: This option controls how long an inactive Web connection stays

logged in to the VM1616T. Any changes will take effect immediately.

Telnet Configuration

Enable the checkbox if you want the VM1616T to receive commands on Port 23 for telnet use. See Telnet Operation, page 44, for further details.

Note: The VM1616T must be power cycled for a change in the Telnet configuration block to take effect.

37