VM1616T User Manual
Telnet Operation
The VM1616T can be operated and configured via a remote terminal session using Telnet.
To log into the VM1616T by means of a Telnet session, do the following:
1.On your computer, open a terminal (command line) session.
2.At the prompt, key in the VM1616T’s IP address in the following way: telnet [IP address]:23
3.Press Enter. The login screen appears. At the login prompt, provide your Username and Password.
Configuration Menu
Once a Telnet connection to the VM1616T is established, the device’s text- based Configuration Menu comes up, with the following items:
1.H – Call up the command list for help
Command list:
GT – Set gateway address IM – Set IP subnet mask IP – Set IP address
LO – Load connections from nn profile PW – Change password
RI– Read what output is connected to nn input RO – Read what output is connected to nn input SB – Set the serial port baud rate
SS – Switch input to specified port
SV - Save the current connection to nn profile
TI – Set timeout
VR – Software version information
44