VM1616T User Manual

Security Mode

The Security Mode page allows you to configure the VM1616T’s password- related settings.

Password Settings

To configure the VM1616T’s password settings, do the following:

1. Use the Menu button to access the Security Mode page.

Save / Load Profile

Security Mode

2.To set the VM1616T to require a password for local operation, select Password Required, and use the Out dial and turn it clockwise/ counterclockwise to select Yes or No.

Password Required: Yes

Change Password

3.To change the password, use the In dial and turn it clockwise (ascending from 0, 1, 2 .... 9) or counterclockwise (descending from 0, 9, 8.... 1) to select the numbers.

Old Password: 1 2 3 4

New Password: 0 0 0 0

4.Enter the old password (see Enter Password, page 17). Then, press In/Out/ Enter to move the cursor down to New Password, and enter the new password in the same way.

5.Press and release In/Out/Enter to confirm the password and continue to the Main menu.

Note: 1. If you enter an incorrect password, re-enter the correct password over the incorrect string.

2.If Password Required (see Security Mode, page 28) is enabled, the timeout is 5 minutes.

28