Personal Video Recorder 37
Selection Function
Motion-triggered recording
Record video and audio, triggered by motion in the video
frame. This feature could be used for security applications
or to record only material of interest over time.
You can specify an optional “include” rectangle that
defines the area to watch for motion, and an “exclude”
rectangle that is excluded from motion detection. For
example, you could monitor a room, but exclude a fish
tank, which would falsely trigger recording.
You can simultaneously perform motion-triggered and
time-lapse recording, to record a minimum number of
frames over time, but include real-time video when motion
occurs.
Click the Set Custom button, then click Default Motion
Trigg ered . To edit the preset, click the Edit button, and
follow the on-screen steps.
Record in Windows Video Format
WMV recording lets you record WMV video to a file. Use
these settings to record a Windows Media file for
streaming over a 56K dial-up network connection or a
cable or DSL network connection.
Click the Map Preset button, then click 56K Modem or
Cable/DSL Modem. To edit the preset, click the Edit
button, and follow the on-screen steps.
Disk
Space Allocates the amount of disk to store recorded video.
Always Record to Temporary Drive
Always use a temporary drive while recording, or only
when the specified recorded file is not on a local disk.
Temporary Drive
Select the drive to hold temporary recorded video.
Amount of disk space to leave free on temporary
drive
Use the slider to set the amount of space to leave on your
temporary drive. Use this to prevent the recording from
completely filling your drive.
Current
Settings Displays the video format, size, frame rate, and audio
format for recorded video.