Add: Click to add the rule profile to the table at the bottom of the screen.
Update: Click to update information for the rule if you have selected a list item and have made changes.
Delete: Select a list item and click Delete to remove the item from the list.
New: Click New to erase all fields and enter new information.
Priority Up: Select a rule from the list and click Priority Up to increase the priority of the rule.
Priority Down: Select a rule from the list and click Priority Down to decrease the priority of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click Update Priority to save the changes.
3.8.6 Management
Management enables you to set up SNMP and Remote Management feature.
3.8.6.1 SNMP
This screen enables you to configure SNMP.
Enabled/Disabled: Click to enable or disable SNMP.
System Name: Displays the name given to the router.
System Location: Displays the location of the router (normally, the DNS name).
System Contact: Displays the contact information for the person responsible for the router.
Community: SNMP system name for exchanging SNMP community messages. The name can be used to limit SNMP messages passing through the network. The default name is 'public.'
Trap Receiver: Type the name of the destination PC that will receive trap messages.
3.8.6.2 Remote Management
This screen enables you to set up remote management. Using remote management, the router can be configured through the WAN via a Web browser. A user name and password are required to perform remote management.
39
