DLA2/4/6 Speaker Level Audio Router
RF Control
Symptom | Possible Cause | Solution | |
No control of DLA2/4/6 | 1. Wiring: Signals from | Check RF Receiver Base | |
from optional RF Remote | RF Receiver Base not | connection to DLA2/4/6 | |
| reaching DLA2/4/6 | and verify connectivity | |
|
| Check Room 1 indicator | |
|
| on front of DLA2/4/6 | |
|
| by sending a command | |
|
| from the RF remote. If | |
|
| the indicator LED ashes | |
|
| red, the RF signal is be- | |
|
| ing received. | |
|
|
| |
| 2. Remote Control bat- | Replace batteries | |
| teries are dead |
| |
Intermittent control of | 1. Position of Receiver | Move Receiver base to | |
DLA2/4/6 from optional | base not optimal | nd optimum placement. | |
RF Remote |
|
| |
2. Radio Frequency de- | Check for other devices | ||
| |||
| vices operating nearby in | in the home or neigh- | |
| same frequency band | boring dwellings and | |
|
| relocate if possible | |
|
|
|
28 | ©2008 • All rights reserved. |