ATON DLA4, DLA2, DLA6 manual Option #3 Third-Party Universal/Learning Remote Control

DLA2/4/6 Speaker Level Audio Router

Additional RF Remotes (DLA2RM, DLA4RM, DLA6RM)

Up to six additional DLA RF Remotes can be added to an exisiting RF receiver, providing conve- nient RF control for the entire family. Programming additional remotes can be accomplished in a matter of seconds. See the DLA RF Remote Instruction Sheet for more information.

			ROOM 1		ROOM 2	ROOM 1		ROOM 2
			1		2	1		2
ROOM 1		ROOM 2	ROOM 3		ROOM 4	ROOM 3		ROOM 4
1		2	3		4	3		4
						ROOM 5		ROOM 6
						5		6
ALL	SCENE	VOL	ALL	SCENE	VOL	ALL	SCENE	VOL
ON		+	ON		+	ON		+
ALL	MUTE	–	ALL	MUTE	–	ALL	MUTE	–
OFF		VOL	OFF		VOL	OFF		VOL

DLA2RM DLA4RM DLA6RM

Figure C-6:DLA2RM, DLA4RM, DLA6RM

Option #3: Third-Party Universal/Learning Remote Control

The DLA2/4/6 can be controlled with virtually any brand of universal/learning remote by down- loading DLA discrete IR codes from ATON’s website; www.atonhome.com. These codes can then be imported into most universal/learning remote software applications and transferred into the universal remote.

Tables C-2 through C-4 list all of the available DLA IR codes.

LOCAL

These commands control only the room that a single IR receiver is connected to.

Local Power On	FOB Volume Up	Local Volume = 1	Local Volume = 9
Local Power Off	FOB Volume Down	Local Volume = 2	Local Volume = 10
Local Power Toggle	FOB Mute Toggle	Local Volume = 3	Local Volume = 11
Local Set Default	FOB All On	Local Volume = 4
Local Set Override	FOB All Off	Local Volume = 5
Local Mute On	FOB Scene	Local Volume = 6
Local Mute Off		Local Volume = 7
Local Mute Toggle		Local Volume = 8

Table C-2:DLA Discrete IR Code Set - Local

Note: Local Commands control only one room at a time. Do not atttempt to “daisy chain” one IR receiver into multiple Room IR Inputs as this will cause erratic system behavior.

34 ©2008 • All rights reserved.