ATON DLA6, DLA4 Zone 2 Output of an A/V or Stereo Receiver, 3 A/V Receiver Zone 2 Application

DLA2/4/6 Speaker Level Audio Router

Zone 2 Output of an A/V or Stereo Receiver

Certain A/V Receivers and Stereo Receivers have a Zone 2 feature that allows them to play a seperate source to a second zone. Figure 2-3shows the Zone 2 speaker outputs of an A/V receiver connected to to the AMPLIFIER INPUT of the DLA2. Like the previous example, a pair of speakers are connected to the DLA2s Room 1 Speaker Outputs, while an additional pair of speakers is connected to the Room 2 Speaker Outputs. This application allows the A/V receiv- er’s Main speakers to play in the room in which the receiver is located, while two additional pairs of speakers play in other areas of the home. This is a multi-source application: the Main speakers may play one source, while Zone 2 (the DLA2 locations) plays a different source.

Note: Set the Zone 2 volume level to the point where it achieves the maximum listenable level (prior to distortion). The DLA2/4/6’s volume level will adjust up to this maximum level.

DLA2
PATENT	AMPLIFIER	IR MITTER OUTPUTS
	INPUT	RF
PENDING	SENSE
PWR IN		INPUT
	INPUT		IMPEDANCE
12VDC / 2.1A	9VDC / 100mA			MATCH
			8	8
	CLASS 2 WIRING	PAGE/DB
		TRIG IN	4	4
				1

16/4		16/4
Speaker		Speaker
Cables		Cables
L R	L R
+
-
ZONE 1	ZONE 2
A/V Receiver
	Room 1	Room 2
	Speakers	Speakers
	(Zone 2)	(Zone 2)

Main

Speakers

(Zone 1)

Figure 2-3: A/V Receiver Zone 2 Application

© 2008 • All rights reserved. 9