ATON DLA6, DLA4 DLA2/4/6, A/V Receiver, DVD Satellite, Ir Emitter Outputs, Room Ir Inputs, AIR3

DLA2/4/6 Speaker Level Audio Router

IR EMITTER OUTPUTS

Three IR Emitter outputs are provided for controlling components such as A/V Receivers, DVD Players, CD Players, Digital Music Servers, etc. Any IR signal received by a Room IR INPUT will be sent out of ALL of the IR EMITTER OUTPUTS.

DLA2/4/6

IR EMITTER OUTPUTS

IR

Mini-Emitters

IR

Mini-Emitters

A/V Receiver

DVD

Satellite

Figure 3-3: IR EMITTER OUTPUTS

ROOM IR INPUTS

IR Receiver Connections

The DLA2/4/6 features an IR Receiver Input for each room. To facilitate IR control of each

room, connect a standard IR receiver (such as ATON’s AIR1, AIR3, AIR5 and/or AIR6) to these inputs as shown in Figure 3-4. Each IR receiver will send IR signals to the DLA2/4/6 and control the room it is connected to.* Cat-5 cable can be used to extend the length of the IR receiver’s connecting cable. Provisions exist for IR, Ground, and Voltage.

IR Input

Wh/Green (+12V)

Cat-5 Brown (G)

Wh/Blue (IR)

Splice to Cat-5 Wire

Red (+12V)

Black (G)

Yellow (N/C) White (IR)

AIR3

(or other ATON

IR Receiver)

Figure 3-4:IR Receiver Connections

*System-wide control from one IR receiver location is possible using DLA discrete IR codes. See Appendix C-3.

© 2008 • All rights reserved. 15