Appendix A Standards and compliances
The ATTO Technology FibreCenter 3400 described in this manual generates and uses radio frequency energy. If this equipment is not used in strict accordance with the manufacturer's instruction, it can and may cause interference with radio and television reception. See the Technical Specification sheet for a full list of certifications.
UL 1950 3rd Edition
FCC Standards: Radio and Television Interference
WARNING The ATTO FibreCenter 3400 generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits
for a Class A computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide a reasonable protection against such interference when operating in a commercial environment. Operation of this FibreCenter in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference.
If this FibreCenter does cause interference to radio and television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures:
❈Move the receiving antenna.
❈Relocate the FibreCenter with respect to the receiver, or move the bridge away from the receiver. ❈Plug the computer into a different outlet so the computer and receiver are on different branch
circuits.
❈If necessary, consult an ATTO authorized dealer, ATTO Technical Support Staff, or an experienced radio/television technician for additional suggestions.
The booklet How to Identify and Resolve Radio/TV Interference Problems prepared by the Federal Communications Commission is available from the US Government printing office, Washington, DC.
Canadian Standards
This Class A digital apparatus complies with Canadian
Cet appareil numérique de la classe A est conforme à la norme
European Standards: Declaration of Conformity
This device has been tested in the basic operating configuration and found to be compliant with the following European Union standards:
Application of Council Directive: 89/336/EEC
Standard(s) to which conformity is declared: EN55022,
This Declaration will only be valid when this product is used in conjunction with other CE approved devices and when the entire system is tested to the applicable CE standards and found to be compliant
