Led | ATTO Technology 3400 specification

Term	Definition
LED	Light-emitting diode, a type of diode that emits light when current passes through
	it. Visible LEDs are used as indicator lights on all sorts of electronic devices.
LUN	Logical Unit Number: a Fibre Channel identifier of a device
N_port	A port that connects a node to a fabric or to another node as in a point-to-point
	configuration.
NL port	A port that connects a node in Fibre Channel arbitrated loop
POST	Power On Systems Test: a series of self-diagnostic tests stored in RAM which run
	when power is first applied to a component.
switch	A device which controls routing of data from one component to another.
topology	Logical layout of the parts of a computer system or network and their
	interconnections
warm boot	Startup without cycling the electric power. Operations include POST and
	refreshing all configuration settings. All software in Flash memory will be reloaded
	into RAM.

Secure Data Path Applicationv 2

Image 7

ATTO Technology 3400 operation manual Led

Contents

Atto FibreCenter Secure Data Path Application Page Page Contents Configuration commands Glossary Fibre Channel is a key technology for storageTerm Definition LED Quick start instructions Atto FibreCenter supports diverse SAN needs Zone Port Local and network management Atto FibreCenter 3400 characteristicsSpecifications Features Secure Data Path Applicationv Setting up the FC Rack System Removing a power module Installing a power module Installing the FibreCenter Setting up the Atto FibreCenterTo change the password Cabling Connecting Fibre Channel portsCable length Cable type Cable size Connector Removing the FibreCenter Data transfer when setting up zones Configuring the Atto FibreCenterZone 2 and Zone Hub ports Invalid Switching Patterns CLI command conventions Command Line Interface use and guidance Telnet session Screen Symbol IndicatesExplanation Ethernet and Telnet configuration commands Status Diagnostic commandsVersion Configuration commands Setup command Switch model Updating firmware Linux Kernel UpdateFlash File System FFS Update Type reboot and hit Enter at the bash# prompt If LED is illuminated If LED is not illuminated TroubleshootingCondition Command Default Example Index Command Line Interface Canadian Standards Appendix a Standards and compliancesEuropean Standards Declaration of Conformity Appendix B Contact Atto Technology, Inc