Troubleshooting
If this happens:
Try this:
No audio when using the Aux In | • Check all cables between your XpressRCi and |
Cable or Cassette Adapter | your vehicle’s stereo system for a firm and |
| secure connection.. |
| • Ensure you have selected the proper input |
| source on your vehicle’s stereo system.. |
| • Ensure that the FM Transmitter in the XpressRCi |
| is turned Off, and increase the audio level of the |
| XpressRCi.. Refer to “Set Audio Level” on page 97.. |
Audio fades or has static when | • Check all cables for a firm and secure connection.. |
listening | • If you are using PowerConnect (or FMDA) to |
| listen via your vehicle’s FM radio, and the |
| problem persists, it most likely is interference |
| from another commercial or broadcast FM |
| station.. You will need to find an unused or |
| available FM channel in your area.. Refer to “Find |
| Available FM Channels in Your Area” on page 89.. |
| • If you are using PowerConnect, and you cannot |
| solve the audio problem, try connecting the |
| audio using the Aux In Cable or a Cassette |
| Adapter.. (Refer to page 41 and page 44..) If you |
| cannot use those solutions, consider using an |
| FM Direct Adapter.. (Refer to page 51..) |
|
|
