
3The dock mounting plate can be tilted in different directions.. Adjust as necessary for your particular vehicle.. When the orientation is correct, tighten the knob..
Knob | Adhesive Foot | Dock Mounting Plate |
4Clean the surface with the alcohol preparation pad and let it dry thoroughly..
5 Peel off the adhesive liner.. Position, press, and hold the Dash Mount in place for 30 seconds..
IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for a minimum of
TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon.. Warming the pad with a hair dryer for several minutes will help soften the adhesive.. Be careful not overheat the surface with the hair dryer or you may damage the surface or Dash Mount..
19