Audiovox XDRC2V1, XDRC2UG manual To enable or disable Demo Mode

Demo Mode

Your XpressRCi has a demo mode that starts playing when the radio is not yet activated and it’s either not receiving a signal or not connected to the antenna.. The demo mode disappears when the antenna is connected properly or when the radio starts receiving a signal.. After activation, the demo does not appear under the above conditions..

If desired, you can put the XpressRCi in demo mode after you have activated the radio..

To enable or disable Demo Mode:

1Make sure your XpressRCi is not receiving a signal.. Either cover the antenna so it cannot receive a signal or disconnect the antenna..

2Press menu..

3Scroll to highlight Factory Settings and press the Select button..

4Press the Select button to select Demo Mode.. Demo Mode will turn yellow..

5Turn the Control knob to select:

•Turn clockwise to On to play the demo..

•Turn counter-clockwise to Off when you’re ready to turn the demo off..

6Press the Select button..

107