Aussie 6122S8X641, 6112S8X641 manual Step Hood Handle Assembly, Step Hood/Hinge Assembly

19

Step 20

Hood Handle Assembly

Attach the Hood Handle to the Hood with 2) 1/4-20 x .39” Bolts and Fiber Washers. Align Handle as shown in side view. Place Heat Baffles between the Handle and the Hood, orienting baffles so they align with the end of the handle.

1/4-20 x .39” Bolt

2 pc

Fiber Washer

2 pc

Thermal Baffle

2 pc

Thermal Baffle

Fiber Washer

1/4-20 x .39” Bolt

Side View

Step 21

Hood/Hinge Assembly

Place Hood on Bowl and align hinges. Hood hinge legs insert between Bowl hinge legs. Install Hood Hinge Axle through holes in hinge legs, inserting towards the center of the grill. Fasten in place by inserting Axle Pin through small hole in Axle. Repeat for other Hinge.

Hood Hinge Axle 2 pc

Axle Pin

2 pc