34

In order to prevent flashbacks, the Burner(s) should be removed from the grill and cleaned periodically, especially if the grill has been stored for an extended period of time.

Fig. 9

Burner

Control Knob

Valve Nozzle

Spider webs or nest

inside Venturi Tube

 

How to Clean the Burners

1.Make sure the Control Knobs are turned “Off” and the grill is completely cooled.

2.Carefully remove the Warming Rack, Cooking Grids and Flavor Activator.

3.To remove the Main Burner, first unplug the electrode wire from the back of the Ignitor Button. (see Step 19B). Next, remove the screws securing the burner to the bowl (under bowl - Step 16B). Last, carefully slide burner up and back to disengage from valve nozzles and lift out of Bowl.

4.To remove the Side Burner, remove the screw securing the burner to the side table (under side table - Step 18C)

5.Use a pipe cleaner to clear insect nests from the inlet hole of Main Burner (Fig. 10) and Side Burner tube. (Fig. 11)

6.Open up the Main Burner holes (Fig. 10) and the Side Burner holes (Fig. 11) with a small nail or wire. Use a non- metallic brush to remove food particles and corrosion from the Burner surfaces.

Fig. 10

Non-metallic

Wire Brush

Fig. 11

Open up Burner holes with a small

Side Burner tube

nail or wire.

Pipe Cleaner

Pipe Cleaner

Page 34
Image 34
Aussie 6112S8X641, 6122S8X641 manual How to Clean the Burners