Aussie 68R5A9SSS1 manual Contents, Preparation for Assembly

4

Packing List		3
Preparation for Assembly		4
Assembly Instructions
Step 1	Caster Assembly	5
Step 2	Cabinet Bottom Assembly	5
Step 3	Side Panel Assembly	6
Step 4	Front Crossbar Assembly	7
Step 5A	Cabinet Upright Assembly	7
Step 5B	Front Corner Bracket Assembly	7
Step 6A	Back Panel Brace wire Assembly	8
Step 6B	Cylinder Blocking Wire Assembly	8
Step 7	Door Handle Assembly	8
Step 8	Drawer Track Assembly	9
Step 9A	Drawer Assembly	9
Step 9B	Drawer Positioning	9
Step 10	Door Assembly	10
Step 11	Hood/Body To Cart Assembly	10
Step 12	Side Table Assembly	11
Step 13	Side Burner Valve Assembly	12
Step 14	Side Burner Igniter Wire Connection	12
Step 15A Side Burner Control Knob Assembly		13
Step 15B	Side Burner Grid Assembly	13
Step 16A Bottom Body Panel Assembly		13
Step 16B	Foil Pan/Grease Pan Assembly	13
Step 17	Warming Rack Assembly	14
Step 18	Flavor Activator/Cooking Grid Assembly	14
Step 19	Battery in Igniter Installation	15
Storage	....................................................................	15
Connecting/Disconnecting the Gas
Using Gas		16
LP Gas Cylinder		16
LP Hose & Regulator		17
Connecting LP Gas Cylinder		17
Disconnecting LP Gas Cylinder		17

Contents
Before Using Your Grill
Installation Codes	18
Selecting a Location	18
Performing a Leak Test	18
How to Perform a Leak Test	19
Lighting Grill Using the Pulse-Spark Ignitor	21
Lighting the Rotisserie Burner	23
Manually Lighting the Grill	24
Lighting the Side Burner	25
Check the Flame	25
Manually Lighting the Side Burner	26
Manually Lighting the Rotisserie Burner	26
Cooking on the Gas Grill
Grill Cooking (Direct Method)	27
Roasting (Indirect Method)	28
Rotisserie Cooking	29
Warming Rack	30
End of Cooking Session	30
Care and Maintenance
Cleaning the Grill	31
How to Clean the Burners	32
Emergencies	34
Troubleshooting	34
Important Notice- LP Cylinder with OPD	36
Parts List	38
Parts Illustrations	39
Limited Warranty	40

Register your grill and retain your receipt.

Preparation for Assembly

Remove grill and all the packaging from carton and place on floor. Make sure there are no loose parts.

NOTE: Before using your grill, read the instructions and your manual.

For easier set-up and assembly, follow instructions of each step in the order they are written as you look at the dia- grams. If accessories mentioned in certain assembly steps do not come with your model, skip that step and proceed to the next step that applies to your model.

If you have any questions or need help, contact Customer Service at 1-800-251-7558or go to www.aussiegrills. com. Be sure to have the grill model number and serial number printed on the black label, located inside the left door of the cabinet. If you need replacement parts, look in the Parts List Section to find the exact parts you need. If you need a replacement part under warranty, a proof of purchase will be necessary. You will be asked to forward your proof of purchase via e-mail or to fax your proof of purchase to 423-639-1055 and reference your model and serial number. It is important to register your grill and retain your receipt.