Aussie 68R5A9SSS1 manual Step Front Crossbar Assembly, Step Cabinet Upright Assembly

7

Step 4

Front Crossbar Assembly

Turn cart assembly up on casters. Attach Front Crossbar, with the triangle braces facing down and the flat surface to the front, to Side Panels with six 1/4-20 x .50” Bolts into the threaded holes in the top inside ends of Side Panels.

front crossbar

1/4-20 x .50” Bolt set

6 pc

Step 5

A. Cabinet Upright Assembly

Attach Cabinet Upright to Cabinet Bottom and Front Crossbar with four 5/32 x .31” Bolts. Orient Upright so that Match holder/Chain is closest to top of cabinet (Front Crossbar).

B. Front Corner Bracket Assembly

Attach Front Corner Brackets to Cabinet Bottom Panel and Left and Right Side Panels with eight 1/4-20 x .5” bolts. Flat side of Bracket should be to front of cabinet so it is flush with front edges.

Front Corner Bracket

1/4-20 x .50” Bolt set

8 pc

B

Cabinet Upright

AB

5/32 x .31” Bolt set

4 pc