3.4Advanced Screen
In this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.
BIOS SETUP UTILITY
Main Smart Advanced H/W Monitor Boot Security Exit
Advanced Settings
WARNING : Setting wrong values in below sections may cause system to malfunction.
CPU Configuration
Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
Options for CPU
| Select Screen |
| Select Item |
Enter | Go to Sub Screen |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
Setting wrong values in this section may cause the system to malfunction.
3.4.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
AM2 Boost | [Disabled] |
Overclock Mode | [Auto] |
CPU Frequency (MHz) | [200] |
PCIE Frequency (MHz) | [100] |
Spread Spectrum | [Auto] |
Boot Failure Guard | [Enabled] |
Cool' n' Quiet | [Auto] |
Secure Virtual Machine | [Enabled] |
L3 Cache Allocation | [BSP Only] |
Processor Maximum Frequency | x15.0 3000 MHz |
Processor Maximum Voltage | 1.400 V |
Multiplier/Voltage Change | [Auto] |
Memory Clock | [Auto] |
Flexibility Option | [Disabled] |
CAS Latency (CL) | [Auto] |
TRCD | [Auto] |
If AUTO, multiplier and voltage will be left at the rated frequency/voltage. If Manual, multiplier and voltage will be set based on User Selection in Setup.
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
AM2 Boost
This option appears only when you adopt AM2 CPU. If you set this option to [Enabled], you will enable ASRock AM2 Boost function, which will improve the memory performance. The default value is [Disabled]. Please refer to cau- tion 13 on page 9 for details.
4 3
